TXB0106: SPI QUAD mode application

Ann_Lien

Part Number: TXB0106

Hello expert,

My customer would like to use TXB0106 in their SPI QUAD mode (6-bit) with 1.8V/3.3V level shifter. May we know if TXB0106 is suitable for it? Or you have better solution to recommend? Thanks a lot!

Best regards,

Ann Lien

over 4 years ago

0 Ann_Lien over 4 years ago

TI__Genius 15700 points

add one requirement, need to be auto bi-direction. Thanks!

+1 Clemens Ladisch over 4 years ago in reply to Ann_Lien

Guru 322000 points

When you need auto direction sensing, then you must use a TXB/TXS/LSF level shifter. And the TXB is the best choice for push/pull signals.

However, see the limitations in sections 8.3.2/8.3.4/8.3.6 of the datasheet.

Logic

Logic forum

TXB0106: SPI QUAD mode application