Lack of data sheet XISO6763FQDWRQ1

Marcin Kulczynski

Other Parts Discussed in Thread: ISO6763-Q1, ISO6763

I am Componet Engineer in Scanfi Sieradz - I have question regarding to one of mpn from TI: XISO6763FQDWRQ1 - I couldn't find a data sheet to that mpn in TI website and my question is: It is a good mpn and it is the same like mpn ISO6763FQDWRQ1? I will be gratefull if you helps me.

Best Regards

Marcin Kulczyński

over 3 years ago

0 Clemens Ladisch over 3 years ago

Guru 322020 points

The X prefix is a preproduction marking. The ISO6763-Q1 is now active, so use ISO6763FQDWRQ1.

+1 Andrew J over 3 years ago in reply to Clemens Ladisch

TI__Mastermind 34555 points

Hello Marcin,

Thank you for your post and welcome to E2E. Clemens is correct, the X prefix denotes a preproduction sample. The ISO676x datasheet on TI.com should match your current XISO6763. However, we recommend using ISO6763 since the part is now active.

I hope this helps. Feel free to follow up anything else.

-Andrew

+1 Marcin Kulczynski over 3 years ago in reply to Clemens Ladisch

Prodigy 30 points

Thanks a lot - that answer solved my problem

Logic

Logic forum

Lack of data sheet XISO6763FQDWRQ1