This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74HCS245: Customer is asking eSPI interface Buffer solution!!

Part Number: SN74HCS245

Hi team,

My customer needs Buffer solutions to support eSPI interface and needs BU's suggestion which TI device is better to suggest?

Thanks

  • In Single I/O mode, all eSPI signals are unidirectional, and you can use standard logic buffers (push/pull or open-drain, depending on the signal).

    In other I/O modes, there are bidirectional signals, which cannot be handled on the electrical level without understanding the eSPI protocol. TI does not make such devices.