• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 306 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G07: output level question

Jeff YANG
Genius 5485 points
Part Number: SN74LVC1G07
Other Parts Discussed in Thread: SN74HCS21, SN74HCS08, SN74LVC08A

Hi 

I have a question about SN74LVC1G07.

VCC(3V3_PEX) voltage level with impact output (Y) voltage level?

If Tri_REG_PG use 3.3V is ok? thanks!

Jeff

  • 0
    Guru 272080 points

    The '07 has an open-drain output, so the supply voltage does not directly affect the output voltage; the pull-up voltage can be higher or lower. (A higher supply results in higher drive strength for a low output, but this does not matter in this application.)

    The input voltage should be at least as high as the supply (actually, VIH); 3.3 V is OK.

    (All those Schottky diodes are not cheap; if the inputs have matching voltages, consider AND gates like the SN74HCS08/SN74HCS21/SN74LVC08A.)