SN74LV244A: Data Sheet Revision

Yoshihiko Yamamoto

Part Number: SN74LV244A

In the following thread, there is a typo in the Thermal infomation in the datasheet for the SN74LV244APWR, when will this typo be corrected?

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1217470/sn74lv244a-regarding-thermal-information-after-changed-datasheet-rev

over 1 year ago

0 Albert Xu1 over 1 year ago

TI__Mastermind 22575 points

Hi Yama-san,

We are still working on this. Do you need this for any immediate concerns? If so, we can provide a draft datasheet if you have a specific requirement to fill.

0 Yoshihiko Yamamoto over 1 year ago in reply to Albert Xu1

Intellectual 255 points

Hi, Xu-san,

Customer PCN approval is stalled due to MDS not being corrected.

1. please give me an estimated time frame for when the revised version will be released.

2. What is the exact value of thermal resistance that will be listed after the revision of the data sheet?

If you have a draft version, please send it to me.

BR, Yamamoto

0 Albert Xu1 over 1 year ago in reply to Yoshihiko Yamamoto

TI__Mastermind 22575 points

Hi Yamamoto-san,

The planned date is currently going to be end of month we will get this finished. We have just finished releasing Q2 PCNs so unfortunately, this mistake was postponed. I can send you a draft of the datasheet on Monday (7/10).

Please see picture below for correct thermal values for PW.

0 Yoshihiko Yamamoto over 1 year ago in reply to Albert Xu1

Intellectual 255 points

Hi Xu-san,

Thank you for your response.
When do you plan to officially release the revised datasheet?

0 Albert Xu1 over 1 year ago in reply to Yoshihiko Yamamoto

TI__Mastermind 22575 points

We are planning for end of month currently. This has to go through a re-approval process. Which may take a week starting now.

Logic

Logic forum

SN74LV244A: Data Sheet Revision