• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 65 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74AUC244: Where to connect the EP (Exposed pad) of SN74AUC244RGYR device?

Vlad Gorelov
Prodigy 740 points
Part Number: SN74AUC244


Hello experts,

In the SN74AUC244RGYR datasheet there is no specific details about where to connect the pin EP?

I want to make sure that it's ok to connect the EP to GND.

I saw this https://e2e.ti.com/support/logic-group/logic/f/logic-forum/723481/faq-where-do-i-connect-the-thermal-pad-of-the-logic-qfn-devices thread.

But I want to be sure I wouldn't recommend someone to do that by mistake.

Thanks!