• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 18 subscribers
  • Views 479 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74AVCA406E

DANIELE COZZI
Expert 4160 points

I checked already on the datasheet ,  Clock frequency is specified at 95Mhz .

this should be intended as maximum frequency , correct?

I mean that I can use a CLK frequency lower than 95Mhz.

in fact we specify some parameters at 10Mhz, just for confirmation

Thank you

  • 0
    TI__Genius 9860 points
    Moving to Voltage Level Translation forum.
  • 0
    TI__Expert 4705 points

    Hi, Daniele

    Yes, this value is the minimum value for the maximum frequency that theSN74AVCA406AE can achieve with the 15pF capacitive load. (the test condition is at the datasheet page 15)

    Usually, the more capacitive load, the lower speed for the part running. and we suggest customer to do the simulation to get the maximum frequency our part can achieve in their load condition by using the IBIS model.

    While for your application 10MHz, it should be no problem , this part can handle well.

     

    BR
    junjie