SN74LVC2G79 default value

Patrick Chen

Mastermind 8875 points

Hello,

If power down then power up, what is the default value (Hi/Lo) of Q output? Thank you.

Patrick

over 8 years ago

0 Clemens Ladisch over 8 years ago

Guru 265430 points

The datasheet does not specify this. You have to assume it is random.

0 ShreyasRao over 8 years ago in reply to Clemens Ladisch

TI__Guru 57200 points

The output of clocked devices power up and power down state cannot be determined unless a valid input signal arrives .
It would be indeterminate rather than unknown .

Logic

Logic forum

SN74LVC2G79 default value