CD74HC243: Ringing on the output

Xaver

Part Number: CD74HC243

Hi all,

I have a question:

I have a CD74HC243M96 powered by P5V on a board. When I send a 1KHz 5V square wave into Ax with OEA and nOEB tied to ground, I am getting a 6MHz ringing on the output at Bx during logic high.

Best regards, Xaver

over 8 years ago

0 Emrys Maier over 8 years ago

TI__Guru* 97526 points

Hi Xaver,
Can you provide a scope shot of the input, output, supply, and ground together?

0 Emrys Maier over 8 years ago in reply to Emrys Maier

TI__Guru* 97526 points

Hey Xaver,
I'm going to close out this post until I hear back from you. All you'll have to do is reply to re-open and get my attention.

Logic

Logic forum

CD74HC243: Ringing on the output