Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 18 subscribers
  • Views 234 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G240: Output in low when /OE is high

user4782171
Intellectual 1560 points
Part Number: SN74LVC1G240
Other Parts Discussed in Thread: SN74LVC1G02

Hi Team,

    In datasheet listed that when /OE pin is high and Output would be high impendence. Due to the system needs to make sure the output is low during system bring up and keep a period until system to send and set /OE to low (Initial  /OE is high set by system ).  Could we use a pull down resistor to let and set the output is low?  Or any recommended for this one?

Note.  a NOR gate SN74LVC1G02 can achieve it but it didn't have /OE control.

Best regards,

Albert Lee.