Part Number: SN74GTL2003
Could you please guide us how to calculate the bias current on GREF pin?
Customer wants to take GTL2003 to translate between 1v8 and 3v3. Could they follow the connection in figure 6 in d/s?
The GREF pin is connected to the gate of the reference transistor, so no current flows into this pin. There is a current flowing into DREF and out of SREF; this current is approximately (3.3 V − 1.8 V − 0.8 V) / 200 kΩ.
Figure 6 can be used; the pull-up resistor should always be about 200 kΩ. See the Voltage-Level Translation With the LSF Family application note.
This device can be replaced with the LSF0108. If the signals are not bidirectional, other translators might be more appropriate.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.