LP-AM243: Profinet slave example code

Kevin Joly

Part Number: LP-AM243

Hello,

I am trying to kickoff a Profinet device following this guide https://software-dl.ti.com/mcu-plus-sdk/esd/AM64X/08_00_00_21/exports/docs/api_guide_am64x/PROFINET_DEVICE.html

However, I am having hard time figuring out how to initialize the PN_Handle structure. Is there any example code? Did I miss something?

Thanks by advance,

Kevin

over 3 years ago

+1 Dhaval Khandla over 3 years ago

TI__Mastermind 27774 points

Hi
Are you trying to port your own Profinet stack or a third party stack? Or are you planning to use the pre-integrated stack in the SDK?

Please check the following page for more information on this : https://software-dl.ti.com/mcu-plus-sdk/esd/AM64X/08_01_00_36/exports/docs/api_guide_am64x/INDUSTRIAL_COMMS.html

If you are looking to use the pre-integrated stack in SDK, then you do not need to initialize PN_Handle structure from your application. You just need to use the stack APIs.

More details : https://software-dl.ti.com/mcu-plus-sdk/esd/AM64X/08_01_00_36/exports/docs/api_guide_am64x/EXAMPLES_INDUSTRIAL_COMMS_PROFINET_DEVICE_DEMOS.html

Please note that the link you posted was from SDK 8.0 which is not the latest SDK. 8.1 is the latest version, and I have provided the above link from documentation for SDK 8.1.

Latest SDK can be downloaded from www.ti.com/.../MCU-PLUS-SDK-AM64X.

Regards
Dhaval Khandla

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-AM243: Profinet slave example code