MSPM0G1106: I2C timeout

Asiel Trejo

Part Number: MSPM0G1106
Other Parts Discussed in Thread: SYSCONFIG

Hi, I saw that there is a couple of timeouts ready to be used in the SYSCFG file. My question is how to use them and if I can use them for both controller and receiver. I would like to have one example of configuration and how to use them in code.

Thanks

Asiel Trejo

over 1 year ago

0 Eason Zhou over 1 year ago

TI__Mastermind 39705 points

You can use, but it is only suitable for controller not target.

0 Asiel Trejo over 1 year ago in reply to Eason Zhou

Prodigy 90 points

Hi Eason, thanks!

Do you have a code example in how to use it for the controller?

+1 Eason Zhou over 1 year ago in reply to Asiel Trejo

TI__Mastermind 39705 points

Here is what you need to set in sysconfig, for Timeout A and B you can refer to the attachment.

Then you just need to change the IRQ code to add this interrupt, then the function will work.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G1106: I2C timeout