Which Fapi_issueProgrammingCommand() mode is being used in nowFlash 3.41?

Pashan None

Genius 5660 points

Other Parts Discussed in Thread: TMS570LS3137

Hello Support,

Fapi_issueProgrammingCommand() have four modes.

Is there any way to use Fapi_AutoGeneration mode in nowFlash Command Line or GUI using any option switches?

Usually which mode is used by nowFlash 3.41 internally for TMS570LS3137 devices?

Thank you.

Regards

Pashan

over 13 years ago

0 Chuck Davenport over 13 years ago

TI__Guru 59540 points

Hello Pashan:

I have forwarded your question to our API expert so that he may respond to your question.

Thanks you,

Chuck Davenport

0 John Hall over 13 years ago

TI__Genius 9015 points

Pashan,

There is no options in nowFlash Command Line or GUI to use Fapi_AutoGeneration. nowFlash used Fapi_DataOnly for the data area and Fapi_EccOnly for the ECC area.

0 Chuck Davenport over 12 years ago in reply to John Hall

TI__Guru 59540 points

Hello Pashan,

Did John's reply answer your question? If so, please verify the answer so we may close the thread.

Arm-based microcontrollers

Arm-based microcontrollers forum

Which Fapi_issueProgrammingCommand() mode is being used in nowFlash 3.41?