Other Parts Discussed in Thread: HALCOGEN
Dear sir/Mam.
To transmit data through UART(a frame of 10 bytes in interupt mode), Should i use LIN 1 module as SCI compatiblity mode or SCI3 module.I am trying to write code using scisend() in LIN1 module as SCI compatibility mode. But unable to do it. I need 1Mbps of baudrate(precise).I found precise 1 Mbps is possible in LIN1 module. Kindly help.I also need to receive data (a frame of 10 bytes)@1 Mbps.kindly help in configuration.
Thank you.
