Linux/EK-TM4C1294XL: Linux/EK-TM4C1294XL

Neil Lu

Part Number: EK-TM4C1294XL

Tool/software: Linux

We have products that use TI Linux also. As we know that ROV works on TI-RTOS, does it works on Linux OS? If not, what is another feature in CCS we can use for Stack and Heap check? Thanks,

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 464101 points

Hello,
ROV is only for SYS/BIOS (TI-RTOS). There is no out-of-the-box equivalent for Linux OS. Perhaps there is some 3rd party plug-in, though I don't have any I can suggest off the top of my head.

CCS does have a tool called the "Stack Usage" view. It is a static analysis tool that shows the maximum stack used by a your application.

Thanks
ki

0 Neil Lu over 6 years ago in reply to Ki

Intellectual 610 points

As I tried, Stack Usage is for bare metal code and when I was running TI-RTOS example, everything just shows on ROV, not on Stack Usage as I checked.

0 Ki over 6 years ago in reply to Neil Lu

TI__Guru**** 464101 points

Yes, you are correct about the Stack Usage view. We don't have anything OS specific for Linux like we have ROV for TI-RTOS. Sorry

ki

0 Neil Lu over 6 years ago in reply to Ki

Intellectual 610 points

7888.different sizes.docx 7888.different sizes.docxCan you explain why these two results are different and how can you interpret them? One is from Console and the other is from ROV. I mean the heap sizes.

0 Ki over 6 years ago in reply to Neil Lu

TI__Guru**** 464101 points

the device experts can help best with that. Please start a new thread for your last question.

Arm-based microcontrollers

Arm-based microcontrollers forum

Linux/EK-TM4C1294XL: Linux/EK-TM4C1294XL