cJTAG programmer for F28004X

Part Number: TMS320F280048-Q1

Hi expert,

my customer is using F280048 for a new project.

they use cJTAG to save GPIO and the TDI TDO are used for other function and can not be reused by JTAG.

They chose acroview programming tool, and they do not support F28004X in cJTAG mode. only in JTAG mode.

could you kindly advice a programming tool provider which can support cJTAG for F280048.

BR

Emma

Hello Emma

I've merged your newest thread with this one as the two topics seem to be the same. For further discussion on this topic, please keep to this thread.

Regards,

Vince

Emma,

Can the customer use parallel IO interface instead of cJTAG?  If yes, DataIO can support it.  

If the customer needs cJTAG only, DataIO can support it - but they need some time to implement it.  Let me know.

Thanks and regards,
Vamsi

Vamsi,

could you kindly tell me parallel IO interface use which GPIO for 64PIN F280049?

I found this in a training slides.

If this method needs so much GPIO, I would say No. Since they almost use every GPIO.

BR

Emma