TMDSCNCD28388D: Duplex communication

Carlo

Part Number: TMDSCNCD28388D
Other Parts Discussed in Thread: CC2652R, CC3120

Hi E2E,

Our customer is using the TMDSCNCD28388D control card and wanted to know if it is possible to establish duplex communication between two C2000 microcontrollers? If yes, how exactly to verify that communication has been established?

Thank you in advance for the inputs.

Regards,
Carlo

over 5 years ago

0 Nima Eskandari over 5 years ago

TI__Guru 52220 points

Is this for SCI, SPI, FSI?

0 Carlo over 5 years ago in reply to Nima Eskandari

TI__Expert 7715 points

Hello Nima,

Our customer wants to establish wireless communication between microcontrollers with any protocol, the wireless transmission range is between 100-150 metres

Regards,
Carlo

0 Nima Eskandari over 5 years ago in reply to Carlo

TI__Guru 52220 points

Wireless communication? In that case you will need to have a wireless peripheral device to use alongside your C2000 device. I think you want to look into UART based communication with with CC3120 or maybe CC2652R. These devices can do wifi/bluetooth etc.

Nima

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSCNCD28388D: Duplex communication