This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi BU friends,
These are message from console. What's wrong? I do not modify any hardware set.
C28xx_CPU1: Error during Flash Programming. Address 0x00081000, Data 0x0000A000, FMSTAT 0x00000030
C28xx_CPU1: File Loader: Memory write failed: Unknown error
C28xx_CPU1: GEL: File: C:\WorkSpace\10v19_C2kBUcode\ttplpfc_nonpowerSUITE_F28002x\RELEASE\ttplpfc_nonpowerSUITE_F28002x.out: Load failed.
C28xx_CPU1: Error during Flash Programming. Address 0x00080000, Data 0x0000A000, FMSTAT 0x00000030
C28xx_CPU1: Please make sure the memory location you are programming have not already been programmed.
C28xx_CPU1: Error during Flash Programming. Address 0x000826CC, Data 0x0000A000, FMSTAT 0x00000030
C28xx_CPU1: Please make sure the memory location you are programming have not already been programmed.
Thanks,
Minghan
Minghan,
As we notified in the error message, the image you are loading to flash is trying to convert an already programmed 0 to 1. This is not possible for the program operation. You need to erase the flash before you load the code. Please let me know how it goes after erase.
Thanks and regards,
Vamsi
Hi Vamsi,
Thank you for your support.
Actually, I have erased the flash by uniflash tools.
But still cannot load the program. And occur the same error.
How to solve this problem?
Thanks, Minghan
Minghan,
Can you share the snapshots for the flash and corresponding ECC area? I want to check whether or not it is in erased state.
Thanks and regards,
Vamsi
Minghan,
Glad to know that it is resolved. Can you post how you fixed it? It will help others.
Thanks and regards,
Vamsi
Hi Vamsi,
The power supply is not good. I adjust the power supply for the C2000.
Thanks, Minghan