SM320F2808 Docking Station Schematics

Richard Shank

Hi,

I'm working with the SM320F2808 docking station and I need the schematics. The ones that come with the kit are incorrect. Does anybody know where to get the correct schematics? In particular I need to see how the Boot connector is wired up to the processor and power and ground.

Thanks,

Rick

over 15 years ago

0 Brett Larimore over 15 years ago

TI__Guru 57255 points

Rick, The schematics, hardware design files and development software for that kit can be found in the "Baseline Software Setup". Search for TMDSDOCKF2808 on http://www.ti.com/f28xkits once there select the Baseline Software Setup and download it. Once it is downloaded, the schematics for the two major docking station revisions can be found at: C:\TI_F28xxx_SysHW\DockingStn-HWdevPkg\ Thank you, Brett

0 Richard Shank over 15 years ago in reply to Brett Larimore

Expert 2245 points

Thanks. These schematics look to be correct for the hardware. Thanks again.

C2000™︎ microcontrollers

C2000 microcontrollers forum

SM320F2808 Docking Station Schematics