TMS320LF2406A: Help, need help

Fernando Galvão

Prodigy 10 points

Part Number: TMS320LF2406A

Hello,

I'm new in this area,

I have a device that uses the tms320LF2406APZA shorted out.
Bought a new one without programming.

I got another card and I need to make a backup.

Is it possible to backup the schedule?

What equipment do I need to backup and program the new chip.

over 4 years ago

0 MatthewPate over 4 years ago

TI__Guru* 83280 points

Fernando,

I'll refer to this post on the method, https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/762401/ccs-tms320lf2406a-tms320lf2406a

but you will need CCS v3.3, which can be downloaded here: https://software-dl.ti.com/dsps/forms/self_cert_export.html?prod_no=CCS_3.3.83.20_Platinum.zip&ref_url=https://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/CCSv3/CCS_3_3/

Above assumes you have a JTAG connection that is supported by the above. I think the XDS100 is supported in CCSV3.3, but you will need to check post install. We can have further conversation if you don't have a JTAG debugger on which one to get.

Best,

Matthew

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320LF2406A: Help, need help