TMS320F28027F: DRV8305

Vaishali Sabnis

Part Number: TMS320F28027F
Other Parts Discussed in Thread: DRV8305

Hello

I am using Piccolo28027f + DRV8305 to control BLDC motor.

I generated .out file from projlab05b.c and loaded in Piccolo28027f using Instaspin Universal GUI. Motor runs smoothly for any RPM.

Now i exported that project as: File---Export----General----Archieve File----Next----Select project to be archieved---Tick to resolve & export linked sources box----Browse location to be saved----select zip format----Finish

This zip file i am trying to import on another PC.

File----Import ----Import existing CCS project----select archieve file---select zip file----finish

I generated .out file from projlab05b.c. But when i am loading it in piccolo28027f and runing it, nothing happens. Motor is not running.

Is there any wrong steps i am doing while exporting and importing project on another computer. Please Guide.

Thank you

over 4 years ago

0 Yanming Luo over 4 years ago

TI__Guru** 116090 points

All of the related files should be included in the project package, not only a main file to generate the .out file.

Are you still using the GUI to run this? Or run the code on F28027F board standalone?

0 Vaishali Sabnis over 4 years ago in reply to Yanming Luo

Prodigy 180 points

Yes I am exporting whole project and not only .out file. I ahve modified Projlabxx.c in such a way that when program is loaded in controller it's start running, no need togive Enable system or Run command. I am using GUI only to load project in controller

0 Yanming Luo over 4 years ago in reply to Vaishali Sabnis

TI__Guru** 116090 points

You can try to run the project within CCS first to see what happens, and monitor the related control variables as shown in lab user's guide. Make sure that the modifications you did are correct.

0 Vaishali Sabnis over 4 years ago in reply to Yanming Luo

Prodigy 180 points

Ok I will do it. Thank you

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28027F: DRV8305