TMS320F280039C: Memory map errors in CMD file and gel file for F280033/34 in CCS 11.0

Steve Lim

Part Number: TMS320F280039C
Other Parts Discussed in Thread: C2000WARE

Hi Champs,

I found some misinformation on the memory map of F280033/34 in CCS 11.0. F280033/34 has 128KB flash located in two Banks(Bank0:64KB, Bank1:64KB), but all 128KB memory maps in CCS are in one Bank0.
Pleas fix the wrong information if it has not yet been corrected.

Thanks,
Steve

over 4 years ago

0 Aditya Dholakia over 4 years ago

TI__Expert 7200 points

Hi Steve,

The expert is out of office for this week. Please expect a response by Monday, 11/8.

Thanks,

Aditya

0 Veena Kamath over 4 years ago in reply to Aditya Dholakia

TI__Mastermind 32655 points

Hi Steve,

Thank you for reporting the issue. I will get it updated in the next update.

Regards,

Veena

0 Veena Kamath over 4 years ago in reply to Veena Kamath

TI__Mastermind 32655 points

Hi Steve,

I believe the issue is with the gel file only. The cmd looks correct, right? Note that the cmd provided in the C2000ware is for the superset device, in this case F280039 device.

Regards,

Veena

0 Steve Lim over 4 years ago in reply to Veena Kamath

TI__Intellectual 2925 points

Hi Veena,

The F280034_flash_lnk.cmd file in CCS fold has the same issue.

Regards,
Steve

0 Veena Kamath over 4 years ago in reply to Steve Lim

TI__Mastermind 32655 points

Right. I was looking at the cmd files in the C2000ware. The cmd that comes with CCS needs to be updated.

Regards,

Veena

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280039C: Memory map errors in CMD file and gel file for F280033/34 in CCS 11.0