• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 185 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28388D: Generate the required Source file with SSC Tool before, but I cannot generate it now.

Shaoxing Ke
Expert 3590 points
Part Number: TMS320F28388D
Other Parts Discussed in Thread: C2000WARE

Hi Expert，

     I tried to generate the required Source file with SSC Tool before, but I cannot generate it now. The file f2838x_cm_hw.c it suggested could not be found either?

     C2000 ware cannot find the corresponding file, can you give me some dir?

 

  • 0
    TI__Mastermind 45606 points

    Hi Shaoxing,

    Are you following the steps in the 'EtherCAT_Slave_Controller_User_Guide.pdf'? Located in directory below:

    C:\ti\c2000\C2000Ware_4_00_00_00\libraries\communications\Ethercat\f2838x\docs

    The 'f2838x_cm_hw.c' file should be in the location below after you run 'ethercat_slave_ssc_and_demo_setup.exe'

    C:\ti\c2000\C2000Ware_4_00_00_00\libraries\communications\Ethercat\f2838x\ssc_configuration\cm

    Best,

    Kevin