TMS320F28388D: Unable to find or Import SYS/BIOS RTOS Examples to workspace

pranay r

Intellectual 390 points

Part Number: TMS320F28388D
Other Parts Discussed in Thread: SYSBIOS

Hello all,

I'm using CCS V10.4.0.00006, Downloaded and installed SYS/BIOS v"bios_6_83_00_18".

I tried googling a bit about this, Followed related links as below:

https://www.ti.com/lit/ug/spruhu3d/spruhu3d.pdf?ts=1638874489976&ref_url=https%253A%252F%252Fwww.google.com%252F

But it didn't helped me resolve my issue.

Also Followed this link : https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/825714/rtos-tms320f28388d-tms320f28388d-ti-rtos-support

Below is the screenshot of New > Project Creation tab.

It'd be helpful if you can walk me through for importing or SYS/BIOS project creation.

Thanks in advance.

Best regards,

Pranay.

over 4 years ago

0 Krishna Allam over 4 years ago

TI__Expert 7985 points

Hi Pranay,

Our SME on this subject is out of the office and and she will provide a more detailed response on Dec 15 when she returns. In the mean time though, you can look at this application report entitled: Migrating a DSP/BIOS 5 Application to SYS/BIOS 6 to see if it helps you. It does not directly address what you are asking, but it references a zip file that you can download and it may have some examples that may help.

Regards,

Krishna

0 pranay r over 4 years ago in reply to Krishna Allam

Intellectual 390 points

Hi Krishna,

Thanks for the reply,

I have gone through the document but I was unable to get any of the said configurations in my CCS, Also I tried accessing the link for examples as suggested in the document "www-s.ti.com/.../spraas7.zip" It gives me an error saying link server not found. can you please help us on this.

Our requirement is to have an IC that has Ethernet stack, i2c,SPI and couple of GPIOs and can port RTOS. Please suggest us an alternate controller if in case TMS320F28388D doesnt support rtos.

Thanks and regards,

Pranay

0 Krishna Allam over 4 years ago in reply to pranay r

TI__Expert 7985 points

Sorry Pranay...I noticed that also and was not expecting that. The app report needs to be corrected with this link: https://www.ti.com/lit/zip/spraas7. SYSBIOS is supported on Tenor. As mentioned, our domain expert is out of the office and she will follow up with you during mid to late next week. Thanks, Krishna

+1 pranay r over 4 years ago in reply to Krishna Allam

Intellectual 390 points

Hi Krishna,

I'm able to import SYS/BIOS examples and create minimal projects but facing difficulties when i tried to run in debug mode.

can someone please try to resolve the issue in below thread:

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1064536/tms320f28388d-unable-to-run-f28388d-control-card-in-debug-mode

It'd be helpful if I could get any sort of help so that i can continue my development.

Thanks and regards,

Pranay.,

0 Krishna Allam over 4 years ago in reply to pranay r

TI__Expert 7985 points

Pranay, Looks like you have some guidance on the other thread you were asking about in your above reply. Please let us know if we can close on this thread. Thanks, Krishna

0 Whitney Dewey over 4 years ago in reply to pranay r

TI__Guru 54925 points

Hi Pranay,

I've responded to your other thread. I'm going to close this thread and we'll work to resolve your debug issues over there now.

Whitney

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28388D: Unable to find or Import SYS/BIOS RTOS Examples to workspace