HI,
i am trying to Flash the controller ,but it is going to low power mode while flashing. How to come out of the low power mode.
please help us to resolve the issue.
Regards,
Jagadeesh s

This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI,
i am trying to Flash the controller ,but it is going to low power mode while flashing. How to come out of the low power mode.
please help us to resolve the issue.
Regards,
Jagadeesh s

Jagadeesh,
Is this TI EVM or your custom board? If it is your custom board, you should check the device voltage.
Please take a look following thread on similar issue: