F28M35H52C: memory export with uniflash for concerto F28M35H52C

Part Number: F28M35H52C
Other Parts Discussed in Thread: UNIFLASH

I want to export all the memory from a concerto processor using uniflash. I'm able to read and export memory but I'm not confident what ranges I need to export so that I can flash another processor with the output file and have it run the program? I think I just need the flashed program data but would be interested in exporting everything that's available just in case.

Can someone guide me in determining what ranges I need to export for the m3 and c28 processors in concerto?

Thank you!

over 2 years ago

0 Vamsi Gudivada over 2 years ago

TI__Guru* 84255 points

Hi,

You can check your map file to know the address ranges that are used by your application. However, if you want to get a single file, I would suggest to export the entire flash range (you can get the flash address range in the datasheet memory map section).

Did you program anything in the USER OTP space?

Thanks and regards,
Vamsi