LAUNCHXL-F28379D: .elf file ganeration

Jainam Shah

Prodigy 170 points

Part Number: LAUNCHXL-F28379D

I have launchpad F28379d. How to generate .elf file for any project (I only see .out file).

Actually, I want to develop GUI in order to change variables linked to DAC without reflashing.

So Please guide me on,

1) How to create .elf file for C2000 controller and

2) any approach to develop GUI for the above-mentioned application.

Regards,
Jay

over 4 years ago

0 Krishna Allam over 4 years ago

TI__Expert 7985 points

Hi Jay,

I think this will help you...https://software-dl.ti.com/ccs/esd/documents/C2000_c28x_migration_from_coff_to_eabi.html

Thanks,

Krishna

0 Jainam Shah over 4 years ago in reply to Krishna Allam

Prodigy 170 points

Hi Krishna,

The document is showing how to migrate to EABI, are there not any processes available to directly generate .elf file?

Regards,
Jay

0 Krishna Allam over 4 years ago in reply to Jainam Shah

TI__Expert 7985 points

Hi Jay,

There is no automatic generation. The change from COFF to EABI is generally quite straightforward. You can start by simply configuring the switch to generate eabi output. Majority of the updates will be required in the linker command file and they are all very simple. In rare occasions, you will see issues where you have to do something with your implementation. That is very rare. Please let us know if there are specific questions and issues during the migration.

Regards,

Krishna

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: .elf file ganeration