Dear c2000 expert
LLC input voltage come from PFC output, there are 120Hz ripple on LLC output voltage, can please share some suggestions on to reduce this ripple?
Thanks,
Jack
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear c2000 expert
LLC input voltage come from PFC output, there are 120Hz ripple on LLC output voltage, can please share some suggestions on to reduce this ripple?
Thanks,
Jack
Hi Jack,
Please refer to the app note below. With voltage mode control, usually you have to increase the output capacitor. Using HHC/charge mode control is another option.
Regard,
Chen
Chen,
Thanks for supporting on this.
Your suggested solution is a analog controller, is it possible implmented on digital control solution?
In addition, for your experience, how about average current mode control? Is it possilbe to reduce vout ripple?
Regards,
Jack
Hi Jack,
Yes, we have a coming reference design which is PMP-41006 using charge mode control. The software will be inside DPSDK. You can check early next week.
I don't think average current mode control can do it.
Regards,
Chen
Hi Chen,
Thanks. That means I could download this reference design at ti.com in next week, isn't it?
Regards,
Jack