TMS320F280049C-Q1: tms320f280049c

sagar yadav1

Part Number: TMS320F280049C-Q1
Other Parts Discussed in Thread: C2000WARE-MOTORCONTROL-SDK, C2000WARE, TMDSHVMTRINSPIN, MOTORWARE

Hello,

I want to used Insta spin - FOC sw. How to enable FAST estimator. Also I have Hw of 5kw inverter and BLDC Motor. Can I used Insta spin for BLDC Motor.

Regards,

over 3 years ago

0 Yanming Luo over 3 years ago

TI__Guru** 116090 points

You may download and install the latest MotorControlSDK. The detailed introduction about the InstaSPIN-FOC labs can be found in the lab user’s guide as the link below.

C2000WARE-MOTORCONTROL-SDK: https://www.ti.com/tool/C2000WARE-MOTORCONTROL-SDK

InstaSPIN Lab User’s Guide (MotorControl SDK InstaSPIN Lab Guide.pdf) at the folder: C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\common\sensorless_foc\docs\labs

Example lab projects based on the low voltage kit (LAUNCHXL-F280049C + BOOSTXL-DRV8320RS) at the folder: C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\boostxl_drv8320rs\f28004x\ccs

Example lab projects based on the high voltage kit (TMDSCNCD280049C + TMDSADAP180TO100 + TMDSHVMTRINSPIN) at the folder: C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\tmdshvmtrinspin\f28004x\ccs

More details about motor control with InstaSPIN-FOC can be found in the InstaSPIN-FOC and InstaSPIN-MOTION User's Guide

https://www.ti.com/lit/spruhj1

0 sagar yadav1 over 3 years ago in reply to Yanming Luo

Intellectual 470 points

Hello Yanming,

Thank you for reply.

For Sensor BLDC ,Torque control with max. speed limit which lab I should refer.

I was confused with Motorware or Motor control SDK .

Please help me with correct sw lab.

Regards,

0 Yanming Luo over 3 years ago in reply to sagar yadav1

TI__Guru** 116090 points

The InstaSPIN-FOC is based on sensorless control. As replied to the other thread you posted, you can try use the lab06 for torque control.

0 sagar yadav1 over 3 years ago in reply to Yanming Luo

Intellectual 470 points

please suggest me sensor FOC lab sw .

Also In torque control how to limit the speed .

Regards,

0 Yanming Luo over 3 years ago in reply to sagar yadav1

TI__Guru** 116090 points

You may download and install the latest MotorControlSDK. There is a new Universal Motor Control Lab that includes F28002x based sensored-FOC you want. The detailed introduction about the lab can be found in the lab user’s guide as the link below. You may follow the guide to port the lab to the F28004x you used.

C2000WARE-MOTORCONTROL-SDK: https://www.ti.com/tool/C2000WARE-MOTORCONTROL-SDK

Universal Project and Lab User’s Guide: https://www.ti.com/lit/spruj26

Example lab project at the folder: C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\universal_motorcontrol_lab\f28002x

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280049C-Q1: tms320f280049c