TMDSHVMTRPFCKIT: Error during rebuild project

Affiq Othman

Part Number: TMDSHVMTRPFCKIT
Other Parts Discussed in Thread: C2000WARE, TMDSHVMTRINSPIN

I am trying to run a motor using TMDSHVMTRPFCKIT Piccolo f28035. I am referring to HVMotorCtrl+PFC (R1.1) Kit How to Run Guide.pdf . Until step Software Setup for HVMotorCtrl+PFC Kit Projects steps 16, after clicking the debug button, this error appear. What is mean by this error? What should i do? For your information, I am using CCS v6.

Im trying to run an induction motor using TMDSHVMTRPFCKIT. I'm referring HVMotorCtrl+PFC (R1.1) Kit How to Run Guide.

The error is shown below.

It was written 'gmake: *** No rule to make target 'C:/ti/controlSUITE2_DMC Rev/device_support/f2803x/v122/DSP2803x_headers/cmd/DSP2803x_Headers_nonBIOS.cmd', needed by 'HVACI_Scalar.out'.'. Please help me how to solve it.

over 3 years ago

0 Navaneeth Narayanasamy over 3 years ago

TI__Intellectual 2910 points

Please use the example projects from motor control SDK

https://www.ti.com/tool/C2000WARE-MOTORCONTROL-SDK

0 Affiq Othman over 3 years ago in reply to Navaneeth Narayanasamy

Prodigy 85 points

I have download and install the motor control SDK... there is no guideline in there..i dont know how to use it. Before this i'm just refer to HVMotorCtrl+PFC (R1.1) Kit How to Run Guide, and there are some errors. I dont have any idea about it. I am student, this is the first time i used TMDSHVMTRPFCKIT.. Please guide me.

0 Navaneeth Narayanasamy over 3 years ago in reply to Affiq Othman

TI__Intellectual 2910 points

Affiq, You can import the project in CCS from C2000Ware_MotorControl_SDK_4_00_00_00\solutions\tmdshvmtrinspin\f28004x\ccs\sensorless_foc

Documents about labs are available at C2000Ware_MotorControl_SDK_4_00_00_00\solutions\common\sensorless_foc\doc

Documents about HW can be found in C2000Ware_MotorControl_SDK_4_00_00_00\solutions\tmdshvmtrinspin\docs

Since the example SW is based on 28004x, please make sure to use the same - TMDSCNCD280049C

0 Affiq Othman over 3 years ago in reply to Navaneeth Narayanasamy

Prodigy 85 points

Thanks mr navaneeth for your concern. But mine is Piccolo f28035 controlcard. does it function if i follow that guide?

And, what is the difference between C2000Ware_MotorControl_SDK and HVMotorCtrl+PFC (R1.1) Kit How to Run Guide?

0 Navaneeth Narayanasamy over 3 years ago in reply to Affiq Othman

TI__Intellectual 2910 points

Since there is a new E2E query on similar topic from you, i will go ahead and close this thread.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSHVMTRPFCKIT: Error during rebuild project