• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 83 subscribers
  • Views 241 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F280039C: CLB Tile 4 Peripheral Muxing

TMS320F280039C: TMS320F280039C: CLB Tile 4 Peripheral Muxing

Irene Boben
Expert 1030 points
Part Number: TMS320F280039C


Hi,

As a follow up to my previous question, when we say for CLB Tile 4, the replica signals CLB_OUT0_2 and CLB_OUT_3 i.e. CLB4_OUT16 and CLB4_OUT24 both are going to Global MUX and this is intentional. What will be the use case here? I mean will there be any scenario where user would configure the same signal to go to Global mux twice?

Regards,

Irene

  • 0
    TI__Mastermind 19501 points

    Hi Irene,

    Off the top of my head, I cannot think of an exact scenario. Let me reach out to technical documentation to double-check the reasoning for this. For now, it does not look to negatively impact anything, but I will get back to you with more details.

    Regards,

    Peter

  • 0 in reply to Peter Luong1
    TI__Mastermind 19501 points

    Hi Irene,

    This connection was left on when reusing the module design from previous devices. I was not informed of an exact use scenario but this was the reasoning I was given. Like I mentioned before, it would not seem like this would impact any cases as if it was not muxed to the Global Mux, it would be left unconnected similar to the other signals.

    Regards,

    Peter