I want to download firmware using SCI port in emulation. Please let me know
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I want to download firmware using SCI port in emulation. Please let me know
Hi Mohammad,
Apologies for the delayed reply. Not sure how this slipped through the cracks. First, have you looked at the F28379 Technical Reference Manual. If not please have a look at section 4.3 Device Boot Modes to see how you configure your device in SCI boot mode. Let us know if helps you and if you have any further questions.
Here is a link to the TRM: https://www.ti.com/lit/ug/spruhm8h/spruhm8h.pdf
Regards,
Krishna