Other Parts Discussed in Thread: TMS320F2811
I'm programming TMS320F2811. While trying to debug, sometimes
I become no problems and sometimes appears the follwing one:
Error connecting to the target:
Error 0x80000200/-1041
Fatal Error during: OCS,
Device driver: Problem with the Emulation Controller.
It is recommended to RESET EMULATOR. This will disconnect each
target from the emulator. The targets should then be power cycled
or hard reset followed by an emureset and reconnect to each target.
Now this problem is always there. Can someone says to me what's the
problem?
Thanks