• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 84 subscribers
  • Views 303 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Schematic TMS320F28379D controlCARD R1.3

Can't open the schematic and layout files provided in C2000Ware

Anuj Maheshwari
Prodigy 80 points
Other Parts Discussed in Thread: TMDSCNCD28379D, C2000WARE

I want to open the PCB layout and schematic files for the control card in ti\c2000\C2000Ware_4_00_00_00\boards\controlCARDs\TMDSCNCD28379D\R1_3 but I am unable to open it in either Altium or Eagle. Can I know which CAD software will allow me to open these files?

  • 0
    TI__Expert 6020 points

    Hello Anuj,

    You can import the Gerber files to Altium which is available at

    ti\c2000\C2000Ware_4_00_00_00\boards\controlCARDs\TMDSCNCD28379D\R1_3

    Follow this procedure to view:

    - Open a CAMTastic session from File on the main menu bar » New » Cam Document
    - Load all the Gerber files in CAMtastic from File » Import » Gerber. Once the Gerber files are loaded, enable CAMtastic panel
    - Turn off the display of all layers except the layers you want to compare within CAMTastic panel

    Regards,

    Uttam

  • +1
    TI__Expert 6020 points

    Another Method without Gerber Files: 

    1. File » Import Wizard » select (PADS ASCII Design and Library Files) 

    2. Add PADS design files from ti\c2000\C2000Ware_4_00_00_00\boards\controlCARDs\TMDSCNCD28379D\R1_3 (ASC file only) 

    If you have any further queries related to Altium import contact Altium Support.

    Regards,

    Uttam