TMS320F2812: support

MotorControl SDK: Includes 3-phase PMSM or BLDC based sensorless InstaSPIN-FOC solutions for F28004xC, and 3-phase PMSM based sensored FOC solutions with fast current loop for F2838x, F2837x F28004x, and F28002x.

MotorWare Software: Includes InstaSPIN-FOC and InstaSPIN-Motion based 3-phase motor control applications for F2802x, F2805x, and F2806x series, supports ACIM, PMSM and BLDC using FOC.

controlSUITE: Includes 3-phase BLDC based on hall sensor or sensorless trapezoidal control, 3-phase ACIM/PMSM based sensored FOC with QEP encoder or sensorless FOC for F280x, F2803x, and F2833x.

Notes: controlSUITE and motorWare are no longer being updated, but will continue to be available for download. The latest software releases for motor control application examples through MotorControl SDK.

Recommend you may use the newer device like F2837x, and F2838x that is supported with the motor control examples in MotorControl SDK.

If you want to use the F2812, you have to migrate the examples in controlSUITE by yourself.

Dear sir,

i am reading absolute encoder position as a theta . and i need to compute the sine(theta) for PMSM motor control. what is the code /function or hoe to get sine(theta) from encoder digital absolute position in 2812 dsp.

There is no such example codes for F2812. You have to design this code by yourself according to the absolute encoder you used.

Dear sir,

I written the code for reading the absolute encoder. Is it possible to control PMSM sensor less control with 2812.

i am reading position separately and for rate separate gyro i am using . with that how to do commutation?