• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 304 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28069M: How to add hal.c into watch window

FA
Prodigy 180 points

Part Number: LAUNCHXL-F28069M

Hello everyone, i was trying to do the lab procedure of Lab-3b, and i struggleing how to add the hal.c into the watch window, like shown here.

Because when i open the "proj_lab03b.js” file, it doesnt show like this picture above. Anyone can help me? Thanks in advance.

  • +1
    TI__Guru** 117160 points

    You can not add any source files into the watch window directly. You can just add the variables into the watch window directly or by using the .js file.

    You may try the step using "View->Scripting Console", copy the content in the file of the .js to the window of "Scripting Console", and then click "enter".