• State TI Thinks Resolved
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 85 subscribers
  • Views 331 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28377D : Bootloader

Thierno Diallo
Prodigy 20 points
Part Number: TMS320F28377D
Other Parts Discussed in Thread: UNIFLASH

Hello,
I cannot load the program on the TMS320 F28377DPTPT with the batch trace code S7C-22A4K9w. We used the version of TMS320 F28377DPTPT with batch trace code YFC-06ALQEW. 
Attached is the error it displays. How to solve this problem?
  • 0
    TI__Mastermind 26955 points

    Sorry for the delay in reply. We are working to identify the right assignee for your post. Appreciate your patience. Thanks, Sira

  • 0
    TI__Guru* 87155 points

    Hi Thierno Diallo,

    1) I see a non-default (non-TI) print in console in the snapshot.  Did you edit the default gel file to include some prints?  If yes, while doing so, did you remove any existing gel memory map Or edit the contents of existing gel functions apart from adding the prints?  

    2) Can you check your linker command file to ensure that all of the memory ranges defined are valid for this device?  This error may also happen when you select a different device CCXML (during target configuration) than the actual target device that the debug-probe is connected to.  Please check.

    3) What is the version of CCS/Uniflash you are using?  Please check for updates and install if any.

    Thanks and regards,
    Vamsi

  • 0 in reply to Vamsi Gudivada
    TI__Guru* 87155 points

    Hi Thierno Diallo,

    I am closing this post since I did not hear back from you.

    Please open a new post if you have further questions.

    Thanks and regards,

    Vamsi