LAUNCHXL-F28069M: LAUNCHXL-F28069M

JS VAISHALI

Part Number: LAUNCHXL-F28069M

Hai,

I am currently working with LaunchXL F28069M.For flashing purpose i am in need of GEL files. Can i get any information regarding how to download these files for the specific board or if present within the ti folders , how to link with the ccs project.

Thanks.

Vaishali

over 3 years ago

0 Siddharth Deshpande over 3 years ago

TI__Mastermind 36305 points

Vaishaii,

Do you need GEL files or the target configuration file (.ccxml)? To connect to the device , you will need a ccxml file.

LaunchXL -F28069 has a XDS100v2 JTAG debg probe. You can try to use the attached one and see if you are able to connect.

/cfs-file/__key/communityserver-discussions-components-files/171/LaunchXL_5F00_f28069.ccxml

Best Regards

Siddharth

0 JS VAISHALI over 3 years ago in reply to Siddharth Deshpande

Prodigy 30 points

Hai,

The requirement is line by line execution of ccs code. So for this requirement, should we use the GEL file? or is there any other method for the query raised above?

0 Siddharth Deshpande over 3 years ago in reply to JS VAISHALI

TI__Mastermind 36305 points

Hi,

You mean that you want to load the code and then debug line by line. Is that coreect?

If so, you can use need a ccxml file (target configuration file) specified above.

You can refer the following post for more details

https://software-dl.ti.com/ccs/esd/documents/users_guide/ccs_debug-main.html

Best Regards

Siddharth

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28069M: LAUNCHXL-F28069M