Other Parts Discussed in Thread: CCSTUDIO
hi, please help me a little...
i need to bootload program by SCI-A
i have read some litrature about that, but i still don't understand how to do this..
As i understand, the following steps i must to do:
initial data:
DSP 320F2812 PGFA
correct programm, "sv_pwm.out" file, hex2000.exe utility, CCS project.
What i did:
in command line i write: " hex2000 -t sv_pwm -o firm.lsb -o firm.msb "
so after this computer crate two files - firm.lsb and firm .msb
i don't understand what i need to do with them.
in instruction, after this i need to generate .bin file
i need to write:
D: \CCStudio_v3.1 \C2000 \cgtools \bin \hex2000.exe AppCode_hex_2810.cmd
FileIOShell.exe -I AppCode.hex -o AppCode.bin
where i could find FileIOShell.exe?
what i need to do after that?
i must to convert .hex to .bin format
and than transferred it to controller, using hyperterminal?
could you give me a little more instructions, please..
Thank you, Igor
