TMS320F280049: Kit for APF

Hi May,

We don't have a C2000 based ref design/kit for APF application at this moment.

For simulation model, I guess you can go to simulation tools like PSIM, PLCES to find example models. 

Qing

Hi Qing,

Do we have IC that could meet this customer requirements? Please see details below.

I intend to run the APF at 15kHz, the micro must handle FFT frequency domain tranformation, PQ time domain transformations, it will be a standalone product for mitigating harmonics up tot the 50th, provide PF =1, the product will use the mathlab/simulink/ code generator workflow, the product will need to have efficiency 98% minimum, it could be that the APF will be a multilevel inverter in the end, if you require any other info please advice.

Thank you.

Regards,
May

Hi May,

C2000 has the computation capabilities/libraries that needed for a typical APF application.

https://software-dl.ti.com/C2000/docs/software_guide/c2000ware/libraries.html

There are also families of high-end, mid-end and low end to choose accordingly.

https://www.ti.com/microcontrollers-mcus-processors/microcontrollers/c2000-real-time-control-mcus/products.html

Thanks,

Qing

Hi Qing, 

Can you please advise which TI C2000 part would be the most powerful in TI portfolio that will handle the computational capabilities/libraries that are required for a typical APF application.

Also, for that specific TI C2000 part please advise what would be the kit that will have the interfaces required to make the link to the Simulink.

I look forward to receiving your advice.

Thanks.

Regards,
May

Hi May,

Will get back to you soon. 

Thanks,

Qing

Hi May,

Let's talk through email so that I can pull in other folks.

Thanks,

Qing