TMS320F28388D: Wrong target config file

John Hite

Part Number: TMS320F28388D

I imported the blinky example from F2838x. The target config lists only TMS320F28388D.ccxml.

When I select debug CCS states the F280049C.ccxml file does not exist. I did have an earlier blinky project that used that processor but it was deleted, files too.

What should I do besides say more bad words?

over 3 years ago

+1 Veena Kamath over 3 years ago

TI__Mastermind 32655 points

Hi,

Is that ccxml marked as Active?

Eg :

Usually after import it should be set as Active and Default. If not, you can make it as active by right click -> Set as Active

Regards,

Veena

0 John Hite over 3 years ago in reply to Veena Kamath

Expert 1355 points

Thanks, that was a problem and I have corrected it.

However, now I get a target power loss message. The MCU163B is mounted in a docking station and both have a green power LED showing.

I think that should be a new ticket so marking this resolved.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28388D: Wrong target config file