TMS320F280039C: When add .syscfg file to the exist Project, bulid the project has gmake error?

Shaoxing Ke

Part Number: TMS320F280039C
Other Parts Discussed in Thread: SYSCONFIG, C2000WARE

Hi Experts,

I am asking for my customer here.

Step followed during configuring the .syscfg file:

1. Add new file .syscfg file, and Build - SysConfig' in the project properties: '--package F28003xD_100PZ', --part 100PZ. as below show:

2. Also enable the C2000-Sysconfig14.0 as show below:

3.Build the project shows the gmake error, and cannot read property "connectivity" of undefined. So could you help me out? Thanks~

over 3 years ago

0 Nima Eskandari over 3 years ago

TI__Guru 52040 points

Looks like you/customer have used our BETA release for the clockTree tool. That's why you are getting this error.

+1 Nima Eskandari over 3 years ago in reply to Nima Eskandari

TI__Guru 52040 points

The error stems from the fact that your C2000WARE SysConfig was updated with the BETA package, you also have the latest STANDALONE SysConfig tool to evaluate the ClockTree tool. However your CCS SysConfig tool is not updated to have the support for clockTree. You have some options here:

1. Do a clean install of C2000WARE so you get the version without the BETA clock tree

2. Contact me and I can share instructions for getting this to launch on your CCS with the clocktree support:

0 Nima Eskandari over 3 years ago in reply to Nima Eskandari

TI__Guru 52040 points

However, for #2, if you do decide to do this, the BETA has untested features that you may not want to use. I recommend #1 but I will leave that up to you to decide!