TMS320F280025C: Debugging issue.

Prashant Chougule

Part Number: TMS320F280025C

Hello,

I am facing some issue while debugging the TMS320F280025C.

While debugging the code, suddenly the debugger can’t show the variables in watch window,

showing “Device may be operating in low power mode. Do you want to bring it out of this mode?” and showing 3 options “Cancel” , “Yes” , “No”.

But there is no response if selected any of them, again getting same popup message. For reference please find attached snap.

0 Santosh Jha over 3 years ago

Hi Prashant,

Is this TI EVM or your custom board? Are you using external emulator or non-board XDS110? What code it is running?

You can try to put the board in 'Waitboot' mode and then connect again.

Regards, Santosh

0 Prashant Chougule over 3 years ago in reply to Santosh Jha

Hello,

We are using our custom board, using non board XDS110 .

and using Flash Booting now.

Thanks & Regards,

Prashant

0 Santosh Jha over 3 years ago in reply to Prashant Chougule

Prashant,

Please try 'Waitboot' mode, and see if you can connect it.

Prashant Chougule said:
using non board XDS110

I am assuming you are using external emulator XDS110, right?

Regards, Santosh

0 Prashant Chougule over 3 years ago in reply to Santosh Jha

Yes right, we are using external emulator XDS110.

I'll try for 'Waitboot' mode.

Thanks

0 Santosh Jha over 3 years ago in reply to Prashant Chougule

Okay. Let us know if 'Waitboot' works.

C2000 microcontrollers forum