TMS320F28335: How to get flashing logs from externally-executed DSS script

Jason Etherton

Hi,

I'm using DSS to execute a script using dss.bat. At the beginning of the script I load some binaries and the manufacturing engineers would like to see the logs from this operation.

Are they available in via DSS?

Thanks,

Jason

over 3 years ago

0 Santosh Jha over 3 years ago

TI__Guru 50611 points

Hi Jason,

Did you try this link:

https://software-dl.ti.com/ccs/esd/training/workshop/ccsv9/dss_fundamentals_workshop.html

Please let me know if it works for you.

Regards, Santosh

0 Jason Etherton over 3 years ago in reply to Santosh Jha

Prodigy 20 points

Hi,

Thanks for the quick response!

I have set all logging available to max but I can't get the low-level logs - the kind of info that flashes past in the status window when using the CCS GUI. All I get are the software logs.

It is not the software logs I need, but the actual programming logs from the programmer hardware.

Please advise,

Jason

0 Santosh Jha over 3 years ago in reply to Jason Etherton

TI__Guru 50611 points

Jason,

I am forwarding the thread to CCS team. Please expect response later today.

Regards, Santosh

0 Ki over 3 years ago in reply to Jason Etherton

TI__Guru**** 481511 points

Jason Etherton said:
I have set all logging available to max but I can't get the low-level logs - the kind of info that flashes past in the status window when using the CCS GUI. All I get are the software logs.

Can you provide a bit more details about this additional logging? Are these messages coming from some other source besides DSS?

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28335: How to get flashing logs from externally-executed DSS script