• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 359 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379D: Need help on getting started with TMS320F28379D and its F28379D controlCARD for SPI and UART RS-485 half duplex communication also with loop back test during initialization

Sid C
Intellectual 360 points
Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Hi,

           I am new to use this TMS320F28379D and its F28379D controlCARD for C2000 Real time control development kit, my requirement is  , on this I need rLoop back test of communication peripherals, watch dog timer on failure of loopback test and intefacing code as shown in image.

           So please share me what resources I need to learn and get started with this MCU and control card.

Thanks,

Sid C

  • +1
    TI__Mastermind 23490 points

    Hi Sid,

    Sid C said:
     So please share me what resources I need to learn and get started with this MCU and control card.

    The technical reference manual has all of the information about the device.

    I think the best way to start learning about SCI/SPI is looking at the software examples, located within C2000Ware SDK:

    C:\ti\c2000\C2000Ware_version\driverlib\f2837xd\examples\cpu1\sci

    C:\ti\c2000\C2000Ware_version\driverlib\f2837xd\examples\cpu1\spi

    Lastly, I recommend C2000 Academy for learning about the device and how to start using the device.

    Best Regards,

    Marlyn