• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 516 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280037: Linker/assembler diagnostic for blocked vs non-blocked data access

Luke Chen
Expert 5090 points

Part Number: TMS320F280037

Hi champs,

My customer uses CGT v20.2.4 LTS and see data block warning messages when build project, he see there are some descriptions on below web-page,

https://software-dl.ti.com/C2000/docs/cla_software_dev_guide/faq.html#what-does-the-symbol-x-referenced-in-a-obj-assumes-that-data-is-blocked-but-is-accessing-non-blocked-data-in-b-obj-runtime-failures-may-result-warning-from-the-linker-mean

This is one new diagnostic function of CGT v20.2.x LTS, my customer wants to know is there any risk if he ignores this warning message?

Regards,

Luke