TMS320F280039C: Using fill to oxFF set unused space and generated HEX files

Shaoxing Ke

Part Number: TMS320F280039C

Hi Champs,

I am asking for my customer here.

We want to fill the data in the Hole section, and found that it can only be done with --image. When we used the ROMS in our project to generate HEX file, it reports as below:

Could you give me suggestion/Dir? Thanks a lot!

The attachment is our project, you can try if you have a freetime.F28003x.zip

over 2 years ago

0 George Mock over 2 years ago

TI__Guru**** 250200 points

In the file roms_directive.hex, remove the semicolon character ";" at the end of line 7.

Thanks and regards,

-George

0 Shaoxing Ke over 2 years ago in reply to George Mock

TI__Expert 3590 points

Hello George,

Yes, it can build, but we do not know how to correspond to the scope of fill in the Hole. Like the ALL_MEM points where? And why this has duplicate section name warning. Customer are newer to C2000, could you please give us detailed example here?

0 George Mock over 2 years ago in reply to Shaoxing Ke

TI__Guru**** 250200 points

The problems you have all come from the post-build step. It appears you don't need that step, and that it can be deleted. But I'm not sure about that.

I need to understand the overall problem the customer wants to solve. Just for now, ignore how you might implement it. What needs to happen?

Thanks and regards,

-George

0 Shaoxing Ke over 2 years ago in reply to George Mock

TI__Expert 3590 points

Thanks George.

BR.

Shaoxing.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280039C: Using fill to oxFF set unused space and generated HEX files