TMS320F28034: data log using CCS

Giorgio Valente

Part Number: TMS320F28034

Hi,

I need some help with the data logging from CCS. I would like to log 3 variables (Iref, IDCfdbk and speed) in three buffers of 200 words and then export them as csv file. Could you please help me with that?

At the moment, this is what I'm doing:

What would it be the next step to export the data buffer in a csv file?

thanks

Giorgio

over 3 years ago

0 Santosh Jha over 3 years ago

TI__Guru 50611 points

Hi,

Easiest way to save to file will be connect the target and open memory browser. Type the address in memory browser and right-click to save it.

Regards, Santosh

0 Giorgio Valente over 3 years ago in reply to Santosh Jha

Prodigy 180 points

thank you for the reply Santosh,

is there a guide somewhere that explains how to do that? I'm relatively new to CCS.

thanks

Giorgio

0 Santosh Jha over 3 years ago in reply to Giorgio Valente

TI__Guru 50611 points

Hi,

Here is the link which explains the details:

https://software-dl.ti.com/ccs/esd/documents/users_guide/ccs_debug-main.html#load-and-save-memory

Regards, Santosh

0 Giorgio Valente over 3 years ago in reply to Santosh Jha

Prodigy 180 points

Thank you! Is it also possible to set a trigger for when to start logging the data?

0 Santosh Jha over 3 years ago in reply to Giorgio Valente

TI__Guru 50611 points

I have not done it myself. You can check DSS scripting and check if it can be used

https://software-dl.ti.com/ccs/esd/documents/users_guide/sdto_dss_handbook.html

Regards, Santosh

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28034: data log using CCS