TMS320F28069M: LAUNCHXL-F28069M

Dev Chandil

Part Number: TMS320F28069M
Other Parts Discussed in Thread: C2000WARE

I am trying to run example codes provided in the C2000Ware. I am able to flash the program in the launchpad using the debug button. Post detaching the debug also the example runs. But If I press reset button on the launchpad, the launchpad boots with the factory firmware flashed in it. Can anybody tell how to persistent my example code in the launchpad

over 3 years ago

0 Kevin Allen18 over 3 years ago

TI__Mastermind 45606 points

Hi Dev,

Which specific example in C2000WARE are you trying to run (please provide the directory location)? It's likely that the example is configured to run from RAM instead of FLASH for standalone execution.

Best,

Kevin

0 Dev Chandil over 3 years ago in reply to Kevin Allen18

Prodigy 210 points

Hi Kevin,

I am using Example_2806xAdcSoc. I have added F28069M.cmd instead of 28069_RAM_Ink.cmd. Post this change I am able to run code from FLASH instead of RAM. However, If I try to use DEALY_US() function in the code, my code halts at that. Also, I am not able to step into the DELAY_US() function.

+1 Kevin Allen18 over 3 years ago in reply to Dev Chandil

TI__Mastermind 45606 points

Hi Dev,

Can you please reference the FAQ post below on how to convert a RAM-based project to a flash-based project? There must be some step missing.

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/758797/faq-f05-flash-how-do-i-convert-a-ram-based-project-to-a-flash-based-project

Best,

Kevin

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28069M: LAUNCHXL-F28069M